1. Manuals
  2. Brands
  3. Harvest TEC Manuals
  4. Farm Equipment
  5. 696
  6. Operation manual

Harvest TEC 696 Operation Manual

100 & 110 gallon preservative applicator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operation Manual
Model 696
100 & 110 Gallon Preservative Applicator
Forage Harvester
696-16-OPR
12/19
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 696 and is the answer not in the manual?

Questions and answers

Related Manuals for Harvest TEC 696

Summary of Contents for Harvest TEC 696

  • Page 1 Operation Manual Model 696 100 & 110 Gallon Preservative Applicator Forage Harvester 696-16-OPR 12/19...
  • Page 2 Council of 17 May 2006 and other applicable European Directives including Directive 2004/108/EC on the Electromagnetic compatability. The application of preservatives for hay Harvest Tec system will be turned on after being installed on a farm press has been declard in conformity with the Machinery Directive.

  • Page 3: Table Of Contents

    Harvest Tec Model 696 Operations Table of Contents PAGE Introduction System Requirements Installation Kit Reference Chart Safety Safety Decals Safety Sign Locations Preparing the Applicator for Operation 9-10 Filling the tank Connecting power and communication harnesses Operation of the main ball valve...
  • Page 4 Table of Contents PAGE Control boxes and wiring harnesses Hose and drain/fill line Optional iPad Mini Mounting Kit Optional iPad Display Kit Installation kits specific to balers Install Kit 4438B Install Kit 4439B Install Kit 4490B Install Kit 4491B Install Kit 4492B Install Kit 4494B Install Kit 4495B &...

  • Page 5: Introduction

    Apple iPad (not included) using the Hay App. As well as the option to plug directly into most tractors that have an ISOBUS Monitor. The 696 Applicator System offers these advantages by operating through an Apple iPad: 1.

  • Page 6: Safety

    LBX331 -332 roto-cutter 030-4497B LBX431 - 432 roto-cutter 030-4497B LB333 - 433 STD or packer 030-4495B LB333 - 433 roto-cutter 030-4497B LB 433 STD or packer (2011-2012) 030-4528B LB 433 roto-cuter (2011-2012) 030-4529B Challenger LB33 030-4494B LB34 030-4492B LB44 030-4491B Claas 2200/1200/3200/3400 030-4499B...

  • Page 7: Safety Decals

    Safety Decals Number 1 Spraying hazard. Disconnect power before servicing the applicator Part no. DCL-8007 Number 2 Falling hazard. Do not step in this area. Part no. DCL-8002 Number 3 Use caution when working around chemicals. Wear all protective equipment according to the label of the product.

  • Page 8: Safety Sign Locations

    Safety Sign Locations 3, 4, 5 3, 5...

  • Page 9: Preparing The Applicator For Operation

    (C) will be horizontal when closed. Reinstall the protective plug and close the cams. The Harvest Tec model 9212 and 9215 transfer pumps are recommended for this process. Water is recommended for first time and annual start up procedures.

  • Page 10: Operation Of The Main Ball Valve

    *Refer to the Installation Manual for details on connecting the system to the ISOBUS. Harvest Tec applicators will now be able to display on a split-screen ISO terminal, the CCI1200, offered with Krone balers. The moisture can also be shown on the baler’s operating screen but the split-screen setup is the recommended option from Harvest Tec for the monitoring of all critical system functions such as moisture, application and bale information.

  • Page 11: Downloading The Harvest Tec App

    4. Select an available network when detected by the iPad, shown in area above that currently says ‘Other.’ 5. Select App Store icon (below) and open. *You will need a Wi-Fi connection available to view App Store. **The Harvest Tec system WILL NOT appear under the Bluetooth tab in the Setting App.

  • Page 12: Ipad Integration Control Module

    iPad Integration Control Module 030-6672C To operate the applicator, connect the iPad cord to the iPad Integration Control in the port indicated by: iPad Integration Control Light Signals Green Slow Blink – Power supplied to the applicator system and the unit is going through its startup process.

  • Page 13: Shutting Down The Hay App

    Shutting Down the Hay App To shut down the Hay App double click the home button (Figure A). This will show the open apps that are running on your iPad (Figure B). *Note: By pressing the home button one time to return to the home screen, the Hay App does not shut down. The system will however, stop applying preservative after 10 seconds.

  • Page 14: Device Selection

    Operating the Harvest Tec iPad App (continued) When ready to operate your applicator system, open the Hay App on the iPad by selecting the Hay App icon. Device Selection The app will open to the Device Menu screen as shown below.
  • Page 15 Operating the Harvest Tec iPad App (continued) Manual Selection Selecting the Manual button (below) displayed to the right of the baler name will open the operation manual for your baler. *Use the following information for Large Square Balers. *You do not need to be connected to a baler to open the manual after a baler has been connected.

  • Page 16: Tab Descriptions

    Operating the Harvest Tec iPad App (continued) Tab Descriptions Automatic Mode: This mode allows you to use all of the applicator features such as adjusting preservative application on the go and counting total pounds of product used. Manual Mode: Allows operator to manually turn pumps on and off. This mode also has moisture content displayed.

  • Page 17: Screen Menus

    Screen Menus Use the screen shots below to navigate through the operation screens. Automatic Mode Bluetooth Connection Indicator Green -DCP is connected Yellow -DCP connecting -DCP not connected Manual Mode Bluetooth Connection Indicator Green -DCP is connected Yellow -DCP connecting -DCP not connected -Pump is OFF -Pump is ON...
  • Page 18 Setup Mode – Large Square Balers NEEDS TO BE U PDAT ED *Only used if equipped with Tagger Indicates tagger is ON Turn Tagger ON by selecting the *If RFV Equipped, additional options If using RFV Spray Module, Indicates Spray Module is ON will appear on Bale ID Screen (next) turn ON by selecting the Make sure Knotter/Dye Tip...
  • Page 19 Setup Mode – Large Square Baler (continued) *Select X to turn on options shown Indicates Crop Eyes are ON *Only used if equipped with GPS *Select grey area to change *Select appropriate GPS unit *Adjust alarm setting and turn on pump indicates Pump Module is on module by selecting X in grey area Select correct tip setting...

  • Page 20: Setup Mode

    Setup Mode – Large Square Baler (continued) *Select correct bale weight, length, *Turn on Bale Rate sensor, and time per bale information Green bar indicates sensors are ON *Ensure all baler sensors are turned OFF *If using a scale kit, turn sensor ON...

  • Page 21: Software Versions

    Setup Mode – Large Square Baler (If RFV Equipped *Select correct bale weight, length, *Turn on Bale Rate sensor, and time per bale inforation Green bar indicates sensors are ON *Select correct bale size Software Versions *Versions shown are examples (will not match your applicator)

  • Page 22: Job Records

    Job Records Type desired Field Name, select Create Job *When RFV Equipped, Average RFV, Ave TDN/CA90% info will be added For Bale details select Bale Use arrows to change jobs shown Button...
  • Page 23 Job Records (continued) Select Download when wanting to Use arrows to change jobs shown. Pressing the Select or Select All tab to download job records to USB Stick Indicates selected jobs choose which job to download or delete The Export allows you to send an email a When the Export page is opened the bale When all bales have been retrived, Export file with selected job records...

  • Page 24: First Time And Annual Startup

    First Time and Annual Startup Instructions – Large Square Balers THE UNIT MUST BE CHECKED OUT BEFORE FIELD OPERATION! Check and Prime the Pumps 1. Put 10 gal (5L) of water in tank and turn main ball valve on. 2. Inspect for any leaks or drips at this time. If any are found tighten or replace area or fitting. 3.
  • Page 25 Remember level 1 must be lower than level 2 and level 2 must be lower than level 3. Press Done, when value has been selected. Harvest Tec products recommend rates of 4, 6, and 10 lbs/ton (2,3,5 L/MT). These rates are preset from the factory. Press Back to return to previous screen. IT IS THE OPERATORS RESPONSIBILITY TO FOLLOW THE RECOMMENDATIONS OF THE PRESERVATIVE.

  • Page 26: Bailing Rate Settings - Baler Sensors

    Baling Rate Settings – Large Square Balers After pushing the SETUP MODE key in the Main Menu screen, the screen on the left will appear: 1. On the setup mode screen press the BALING RATE key. 2. Press the grey number value to the right of AVG Bale Weight (Lbs). To adjust the weight of your bales, the scroll tool shown on the right will display.

  • Page 27: Rfv Setup

    RFV Setup Use the information below when your applicator is RFV Equipped. *Only available on large square balers. 1. Select the RFV Setup tab on the Baling Rate Setup Screen. 2. Select the correct height and width of bale by selecting the grey area. All values can be changed. 3.

  • Page 28: Operating Instructions

    Operation Instructions Automatic mode will automatically apply product based on hay moisture content sensed by the moisture sensors and the operator’s presets. See SETTING UP SYSTEM FOR INITIAL USE to change any of these settings. Manual mode will apply preservative to the hay at a fixed rate regardless of the moisture content. *Use the following information Large Square Balers.

  • Page 29: Manual Mode

    Manual Mode After pushing the MANUAL MODE key in the Main Menu screen, the following screen will appear: RFV Equipped 1. To pause the unit during operation select the Pause key. 2. Push the OVERRIDE key to turn on all three pumps at the same time for full output of the system. Use this mode when going through a short area of wet crop.

  • Page 30: Job Records

    Job Records After pushing the JOB RECORDS key in the Main Menu screen, the following screen will appear: *When RFV Equipped, Average RFV, Ave TDN/CA90% info will be added 1. The job number will be displayed at the top center. The current job being viewed will always read "Job #: 0".

  • Page 31: Download Job Records

    Download Job Records After pushing the JOB RECORDS key in the Main Menu screen, the following screen will appear: Prior to downloading job records a USB stick will need to be placed into the USB port on the applicator’s Dual Channel Processor (DCP).

  • Page 32: Export Job Records

    Export Job Records (emailing records) 1. To export the Job Records through an email or save to the iPad select the Export button 2. The list of job records you have created, will display in the middle of the screen and the individual bale information will begin to download automatically.
  • Page 33 Export Job Records (saving to iPad) 1. To export the Job Records through an email or save to the iPad select the Export button 2. The list of job records you have created, will display in the middle of the screen and the individual bale information will begin to download automatically.

  • Page 34: Wiring Diagram - Krone Isobus Integration (Optional)

    Wiring Diagram – Krone ISOBUS Integration (optional) 1. The Baler Power/Communication Harness (006-6650LS2(E)) will attach to the open port of the Tractor Harness (006-6650TM(E)) and run back to the Dual Channel Processor (006-6671LS). Connect the large plug of the Baler Power/Communication Harness (006-6650LS) to the bottom (shorter side) of the DCP. 2.

  • Page 35: Wiring Diagram

    Wiring Diagram The Baler Power/Communication Harness (006-6650LS2) will attach to the open port of the Tractor Harness (006-6650TM) and run back to the Dual Channel Processor (006-6671LS). Connect the large plug of the Baler Power/Communication Harness (006-6650LS2(E)) to the bottom (shorter side) of the DCP. Install green terminator (006-5650Z) to the port labeled Modular Port on the Pump Controller (006-5672).

  • Page 36: Maintenance

    Maintenance • If you are unsure how to perform any of the maintenance steps have your local authorized dealer perform the tasks. Maintenance Schedule Daily 10 hrs 400 hrs Weekly Monthly Season Diagnostics Filter bowl cleaning Tips & tip screen cleaning Tank lid cleaning Dielectric grease connections Rebuild pumps...
  • Page 37 Tips and Tip Screen Cleaning: The spray shield assembly that holds the tips and tip screens is located above the pickup head. Before cleaning the tips and screens all personal protective equipment must be worn (Face shield or goggles, chemically resistant apron, boots, and gloves). Verify that the ball valve located next to the pump is turned off.
  • Page 38 Miscellaneous Maintenance: 1. Depending on the product being used, the system may need to be flushed with water at a regular interval (consult with manufacturer of the chemical.) If Harvest Tec product is being used, flushing is not necessary. 2. Although the pump can run dry, extended operation of a dry pump will increase wear. Watch the preservative level in the tank.

  • Page 39: Winter Storage

    Winter Storage 1. Thoroughly flush the system with water. 2. Remove the filter bowl and run dry until the water has cleared out of the intake side. 3. Remove the red plug from the bottom of the pump, drain, and run the pump for 30 seconds or until dry. 4.

  • Page 40: Pin Outs

    Pin Outs Power/Comm Harness 006-6650TM(E) at Hitch Pin 1 Red +12V Power to TSD Pin 2 Red +12V Power to DCP Pin 3 Orange Keyed Power Pin 4 Gray Shield Pin 5 Green HT Can Low Pin 6 Yellow HT Can Hi Pin 7 Orange Can1 Hi Pin 8 Black...
  • Page 41 Pin Outs (continued) Main Power Connector on DCP Pin 1 Red +12V Power from tractor Pin 2 Black Ground from tractor Pin 3 Orange Keyed power Star Wheel and Bale Rate Sensor connector on DCP Pin 1 Blue +12V Power Pin 2 Orange Ground Pin 3 Black...
  • Page 42 Pin Outs (continued) Pump Communication Plug on DCP Pin 1 Red +12V Can Pin 2 Red +12V Power Pin 3 Gray Shield Pin 4 Green Comm Channel OH Pin 5 Yellow Comm Channel OL Pin 6 Blue Comm Channel IH Pin 7 Orange Comm Channel IL Pin 8 Black...

  • Page 43: Common Questions

    Common Questions 1. How do I turn the system on/off? Turn the key in the tractor to the ON/OFF position. 2. How to get in the LBS/TON, MC%, and TONS/HR menus? In the Main Menu press the Setup Mode option. From this screen you can change your application rates and how much product is applied.

  • Page 44: Troubleshooting

    5. Short in wire between star 5. Replace wire. wheels and DCP. 6. Check hay with hand tester to 6. Contact Harvest Tec if conditions verify. persist. Moisture readings erratic. 1. Test bales with hand tester to verify that cab monitor has more variation than hand tester.
  • Page 45 voltage. Voltage range should be applicator is hooked to battery. See between 12-14 volts. Diagnostics section of manual. System does not pause at the end of a 1. Short in cable. 1. Replace cable. row. 2. Damaged sensor. 2. Replace sensor 3.

  • Page 46: Ipad Troubleshooting

    Refer to your iPad owner’s manual or contact apple How do I send in my iPad for service? customer service. DO NOT SEND iPad TO HARVEST TEC. For other issues refer to your iPad Owner’s Manual or contact Apple Directly *Harvest Tec Does Not Service iPads *...

  • Page 47: Parts Breakdown

    Parts Breakdown Tank, Saddle & Legs 100 Gallon Vermeer, Claas, and Krone Balers with 100 gallon tank 100 gal Tank Tank Lid 005-9206 005-9022C Tank Straps 001-4402 Tank Saddle Not Pictured: Elbow ”s 001-6706A Tank fittings 003-EL3412 005-9100 Vermeer, Claas and Krone Balers Saddle Legs Part#: 001-6706V *If the applicator is being mounted on a Krone 870 HDP baler, two leg adapter brackets will be needed for...
  • Page 48 Tank, Saddle and Legs 110 Gallon Tank Lid Part#: 005-9022E or 005-9208L Tank-110 gallon Part#: 005-9208 Hand Rail Part#: 001-6707HR Tank Straps Part#: 001-4402B Tank Saddle Part#: 001-6707A Not Pictured: Elbow Part#:003-EL3412 Tank Fitting Part#: 005-9100 Agco, Hesston, Massey & Challenger Saddle Legs Part#: 001-6707C New Holland BB940A, BB960A,...
  • Page 49 Tank, Saddle and Legs 110 Gallon (continued) New Holland BB940A, BB960A, Case IH LBX 332, LBX 432 Series Saddle Legs Left Leg Part#: 001-6707DL Right Leg Part #: 001-6707DR (2011 and newer 4 ft wide) (2011 and newer 4 ft wide) Krone Balers Part#: 001-6707KA...
  • Page 50 Parts Breakdown for Pump Manifold Ref# Description Part# Pump plate 001-4646D Mounting Bracket 001-4646C Pump 007-4120H Street elbow fitting 003-SE38 Nipple fitting 003-M3838 Check valve 002-4566F Elbow fitting 003-EL3812 Tee fitting 003-T3812HB Flow meter assembly 006-4725A Straight fitting 003-A1212 Jaco fitting 003-JEL1238 Filter bowl assembly 002-4315-100...
  • Page 51 Parts Breakdown for Star Wheel Moisture Sensors Description Part# Description Part# Block cover 006-4641B Star wheel block 006-4641A Electronic swivel 006-4642A Star wheel sensor 030-4641C Swivel insert w/ Ref # 10 Twine guard-left 001-4645 Snap ring (per side) 006-4641K Twine guard-right (prox) 001-4644 Washer (per side) w/006-4641K...

  • Page 52: Control Boxes And Wiring Harnesses

    Parts Breakdown for 696 Series Control and Harnesses Dual Channel Processor (DCP) Ref Description Part Number Pump Controller 006-5672 End of Bale Sensor 006-7400 Hesston 4755, 4910 EOB Mount 001-4648H EOB Bracket CLAAS 3300 001-4648C Krone EOB Bracket 001-4648K2 EOB BKT Krone 12130...

  • Page 53: Hose And Drain/Fill Line

    Parts Breakdown for Hose and Drain Fill Line Description Part# Description Part# Triple weld hose (pumps to tips) 002-9016 35ft Female Coupler 002-2204A 002-9016B 35ft Male Coupler 002-2205G 002-9016G 35ft Valve Holder 001-6702H Three hose assembly 030-9016LS Ball valve 002-2200 ½”...

  • Page 54: Optional Ipad Mini Mounting Kit

    Optional iPad Mini Mounting Kit (030-2014MK) Description Part # Suction cup mount 001-2012SCM Ram mount 001-2012H ® iPad Mini spring load cradle (Mini 4) 001-2012SLC 16 gauge power wire 006-4723P Female spade connector Hardware Eye loop connector Hardware iPad Mini Charger 12V 001-2012P iPad Mini 4 case 001-2012C4...

  • Page 55: Optional Ipad Display Kit

    Optional iPad Display Kit (030-4670DK) Description Part # Ref Description Part # Suction cup mount 001-2012SCM iPad Mini Charger 12V 001-2012P Ram mount 001-2012H iPad Mini 4 case 001-2012C4 ® iPad Mini spring load 001-2012SLC iPad Mini 4 006-4670IP cradle (Mini 4) 16 gauge power wire 006-4723P 4 amp fuse...
  • Page 56 4438B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 57: Install Kit 4439B

    4439B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 58: Install Kit 4490B

    4490B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Tip strainer 004-1203-100 Nozzle body 004-4722 Nozzle cap 004-4723...

  • Page 59: Install Kit 4491B

    4491B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 60: Install Kit 4492B

    4492B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 61: Install Kit 4494B

    4494B Installation Kit Description Part # Description Part # Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 62: Install Kit 4495B & 4528B

    4495B & 4528B Installation Kit Description Part# Description Part# Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100...

  • Page 63: Install Kit 4497B & 4529B

    4497B & 4529B Installation Kit Description Part# Description Part# Mounting Brkt 001-4435E 004-TT11001VP Spray Shield 001-4435ES 004-TT110015VP Straight Fitting 003-A1414VB 004-TT11003VP Nozzle Cap 004-4723 004-800067-PT Check Valve 004-1207VB Tip Strainers 004-1203-100 Straight Fitting 003-A1414 Nozzle Body 004-4722 003-TT14SQ Street elbow 003-SE14F Lynch Pin 008-4576...

  • Page 64: Install Kit 4498B

    4498B Installation Kit Ref Description Part# Ref Description Part# Spray Shield 001-4810 Tip (orange) 004-TT11001VP Shield Holder 001-4810A Tip (green) 004-TT110015VP Straight Fitting 003-A1414VB Tip (blue) 004-TT11003VP Check Valve 004-1207VB Tip (olive green) 004-800067-PT Nozzle Cap 004-4723 Tip Strainers 004-1203-100 003-TT14 Hose Clamps 003-9002...

  • Page 65: Install Kit 4499B

    4499B Installation Kit Description Part# Description Part# Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100 Hose clamp 003-9002...

  • Page 66: Install Kit 4500B

    4500B Installation Kit Description Part# Description Part# Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100 Hose clamp 003-9002...

  • Page 67: Install Kit 4501B

    4501B Installation Kit Description Part# Description Part# Check valve 004-1207VB Tip (olive green) 004-800067-PT Straight fitting 003-A1414VB Tip (orange) 004-TT11001VP Straight fitting 003-A1414 Tip (green) 004-TT110015VP 003-TT14SQ Tip (blue) 004-TT11003VP Street elbow 003-SE14F Nozzle body 004-4722 Nozzle cap 004-4723 Tip strainer 004-1203-100 Hose clamp 003-9002...

  • Page 68: Install Kit 4509B

    4509B Installation Kit Ref Description Part # Description Part # Spray Shield 001-4810 Tip (blue) 004-TT11001VP Shield holder 001-4440A Tip (green) 004-TT110015VP Lynch Pins 008-4576 Tip (orange) 004-TT11003VP Hose Clamps 003-9002 Tip (olive green) 004-800067-PT Straight Fitting 003-A1414VB Tip Strainers 004-1203-100 Check Valve 004-1207VB...

  • Page 69: Install Kit 4510B

    4510B Installation Kit Description Part # Description Part # Spray shield 001-4811A Tip (orange) 004-TT11001VP Straight fitting 003-A1414VB Tip (green) 004-TT110015VP Nozzle cap 004-4723 Tip (blue) 004-TT11003VP Check valve 003-1207VB Tip (olive green) 004-800067-PT 003-TT14SQ Hose 002-9016 Straight fitting 003-A1414 Hose clamp 003-9002 Elbow...

  • Page 70: Install Kit 4511B

    4511B Installation Kit Description Part # Description Part # Spray shield 001-4704C Tip (orange) 004-TT11001VP Straight fitting 003-A1414VB Tip (green) 004-TT110015VP Nozzle cap 004-4723 Tip (blue) 004-TT11003VP Check valve 003-1207VB Tip (olive green) 004-800067-PT 003-TT14SQ Tip Strainers 004-1203-100 Hose 002-9016 Straight fitting 003-A1414 Hose clamp...

  • Page 71: Install Kit 4514B

    4514B Installation Kit Description Part # Description Part # Spray shield 001-4431B Tip (orange) 004-TT11001VP Shield holder 001-4431KA Tip (green) 004-TT110015VP Mounting brackets 001-4431KB Tip (blue) 003-TT11003VP Straight fitting 003-A1414VB Tip (olive green) 004-800067-PT Nozzle cap 003-4723 Check valve 004-1207VB 003-TT14SQ Hose 002-9016...

  • Page 72: Install Kit 4515B

    4515B Installation Kit Description Part # Description Part # Spray shield 001-4435AS Tip (orange) 004-TT11001VP Straight fitting 003-A1414VB Tip (green) 004-TT110015VP Nozzle cap 004-4723 Tip (blue) 004-TT11003VP Check valve 004-1207VB Tip (olive green) 004-800067-PT 003-TT14SQ Hose clamp 003-9002 Hose 002-9016 Straight fitting 003-A1414 Elbow...

  • Page 73: Install Kit 4525B

    4525B Installation Kit Description Part # Description Part # Spray shield 001-4435ES Tip (olive green) 004-800067-PT Shield holder 001-4435EK Tip (orange) 004-TT11001VP Elbow 003-SE14SQ Tip (green) 004-TT110015VP Straight fitting 003-A1414 Tip (blue) 004-TT11003VP Hose 002-9016 Hose clamp 003-9002 003-TT14SQ Check valve 004-1207VB Straight fitting 003-A1414VB...

  • Page 74: Install Kit 4525Jb

    4525JB Installation Kit Ref Description Part # Description Part # Spray shield 001-4435ES Tip (olive green) 004-800067-PT Shield holder 001-4435EJ Tip (orange) 004-TT11001VP Elbow 003-SE14F Tip (green) 004-TT110015VP Straight fitting 003-A1414 Tip (blue) 004-TT11003VP Hose 002-9016 Hose clamp 003-9002 003-TT14SQ Check valve 004-1207VB Straight fitting...

  • Page 75: Install Kit 4537B

    4537B Installation Kit Description Part Number Description Part Number Holder 001-4435L 004-4723 Shield 001-4435NSX Fitting 003-A1414VB Fitting 003-F14 Strainer 004-1203-100 Manifold Block 001-4435NSB Check Valve 004-1207VB Lynch Pin 008-4576 Fitting 003-A1414F Tip-Red 004-T8003-PT Clear Tubing-1/4” 002-9016 Tip-Brown 004-T80015-PT Blue Stripe Tubing 002-9016B Tip-Pink 004-T8001-PT...

  • Page 76: Install Kit 4539B

    4539B Installation Kit Description Part # Description Part # Shield Holder 001-4435KX Nozzle Tips Spray Shield 001-4435AS Tip (olive green) 004-800067-PT Street Elbow 003-SE14F Tip (orange) 004-TT11001VP Fitting 003-A1414 Tip (green) 004-TT110015VP Hose clamp 003-9002 Tip (blue) 004-TT11003VP Hose-clear 002-9016 Plano Box 008-9001 Hose-blue...

  • Page 77: Install Kit 4540B

    4540B Installation Kit Description Part Number Description Part Number Holder 001-4435KC 004-4723 Shield 001-4435NSX Fitting 003-A1414VB Fitting 003-F14 Strainer 004-1203-100 Manifold Block 001-4435NSB Check Valve 004-1207VB Lynch Pin 008-4576 Fitting 003-A1414F Tip-Red 004-T8003-PT Clear Tubing-1/4” 002-9016 Tip-Brown 004-T80015-PT Blue Stripe Tubing 002-9016B Tip-Pink 004-T8001-PT...

  • Page 78: Install Kit 4540Bx

    4540BX Installation Kit Description Part Number Description Part Number Tip Holder 001-4435NKS 004-4723 1/4" x1/4”Straight 1/4" x 1/4" Straight 003-A1414 003-A1414VB Manifold Block 001-4435NSB Tip Strainer 004-1203-100 Otiker Clamp 003-9008 Check Valve 004-1207VB Plug Fitting 003-F14 1/4" Fitting 003-A1414F Hose – Clear 004-T800067-SS 002-9016 Hose –...

  • Page 79: Install Kit 4541B

    4541B Installation Kit Description Part Number Description Part Number Holder 001-4435KC 004-4723 Shield 001-4435NSX Fitting 003-A1414VB Fitting 003-F14 Strainer 004-1203-100 Manifold Block 001-4435NSB Check Valve 004-1207VB Lynch Pin 008-4576 Fitting 003-A1414F Tip-Red 004-T8003-PT Clear Tubing-1/4” 002-9016 Tip-Brown 004-T80015-PT Blue Stripe Tubing 002-9016B Tip-Pink 004-T8001-PT...

  • Page 80: Install Kit 4541Bx

    4541BX Installation Kit Description Part Number Description Part Number Hose – Clear 002-9016 Tip Holder 001-4435NK Hose – Green 002-9016G Plug Fitting 003-F14 Hose – Blue 002-9016B Manifold Block 001-4435NSB Hose Clamp 003-9002 1/4" x 1/4" Straight 003-A1414 1/4" Fitting 003-A1414F 004-T11003-SS Check Valve...

  • Page 81: Notes

    Notes...
  • Page 82 Notes...

  • Page 83: Warranty Statement

    Harvest Tec, Inc. within 30 days of the failure. If it is determined that a non-Harvest Tec branded hay preservative has been used inside the Harvest Tec applicator system where the failure occurred, then Harvest Tec reserves the right to deny the warranty request at their discretion.
  • Page 84 HARVEST TEC, INC. P.O. BOX 63 2821 HARVEY STREET HUDSON, WI 54016 PHONE: 715-386-9100 1-800-635-7468 FAX: 715-381-1792 Email: info@harvesttec.com...

Table of Contents