Huawei AP4050DN-E Hardware Installation And Maintenance Manual page 68

AP4050DN-E
Hardware Installation and Maintenance Guide
Table 5-6 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
8
Step 7 Cut off the surplus cables along the lower edge of the wire holder, as shown in
Figure 5-45 Cutting off surplus cables
Step 8 Put the connector body onto the wire holder and turn the metal shell by 90°, as shown in
Figure
Issue 05 (2018-02-02)
5-46.
NOTE
Ensure that the wire holder is in good contact with the connector body.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
5 Appendix
Figure 5-45.
60