Huawei AP4050DN-E Hardware Installation And Maintenance Manual page 105

AP4050DN-E
Hardware Installation and Maintenance Guide
l
Issue 05 (2018-02-02)
Figure 5-111 Installed OT terminal
Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals can be
installed on the post and that the electrical connecting pieces have a large contact area.
Two OT terminals can be installed using any of these methods:
– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in
– Cross the two terminals, as shown in
Figure 5-112 Bending the upper OT terminal at a 45- or 90-degree angle
Figure 5-113 Crossing two terminals
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-113.
5 Appendix
Figure 5-112.
97