AP4050DN-E
Hardware Installation and Maintenance Guide
Figure 5-57 Shielded RJ45 connector
1: Core wires
Procedure
Step 1 Strip 20 mm outer jacket off the network cable, peel off the braid shield backward, and cut off
the aluminum foil and protection band, as shown in
Ensure that the shielded layer is intact when stripping outer jackets off the network cable.
Keep the cable insulation intact when stripping the shielded layer.
Figure 5-58 Stripping the cable
Issue 05 (2018-02-02)
2: Aluminum foil
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3: Braid shield
4: Outer jacket
Figure
5-58.
5 Appendix
5: RJ45 connector
67