Default Position Of Din Holder; Removing From The Din Rail - Advantech B+B SmartWorx LR77 v2 User Manual

5.6 Removing from the DIN rail

DIN holder is suitable for DIN rail according to EN 60715 standard only. Default position
of plastic or metal holder, which is used for mounting the router on a DIN rail, is shown in the
following figure:
For removing from the DIN rail it is necessary to lightly push upward the router so that the
top part of the DIN holder hitched to the DIN rail get out of this rail and then fold out the top
part of the router away from the DIN rail.
Figure 20: Default position of DIN holder
Figure 21: Removing from the DIN rail
12
LR77 v2