Ethernet Connector; Connection Of Ethernet Cable; Connection Of Ethernet Connector - Advantech B+B SmartWorx LR77 v2 User Manual

5.7.5 Ethernet Port ETH
Panel socket RJ45.
Pin Signal mark
1 TXD+
2 TXD-
3 RXD+
4 —
5 —
6 RXD-
7 —
8 —
ATTENTION! ETH port is not POE (Power Over Ethernet) compatible!
Plug Ethernet cable into the RJ45 connector labeled as ETH (see figure below).
Description
Transmit Data – positive pole
Transmit Data – negative pole
Receive Data – positive pole
—
—
Receive Data – negative pole
—
—
Table 8: Connection of Ethernet connector
Figure 27: Ethernet connector
Figure 28: Connection of ethernet cable
18
LR77 v2
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output