Port2 Cable Connection; Usb Connector; Connection Of Usb Connector; Connection Of I/O Port - Advantech B+B SmartWorx LR77 v2 User Manual

Plug cable for the second expansion port into the RJ45 connector labeled as PORT2 (see
figure below).
5.7.8 USB Port
Panel socket USB-A.
Pin Signal mark
1 +5 V
2 USB data -
3 USB data +
4 GND
5.7.9 I/O Port
Panel socket 3-pin.
Pin Signal mark
1 BIN0
2 GND
3 OUT0
Figure 30: PORT2 cable connection
Description
Positive pole of 5 V DC supply voltage, 0.5 A
USB data signal – negative pole
USB data signal – positive pole
Negative pole of DC supply voltage
Table 9: Connection of USB connector
Figure 31: USB connector
Description
Binary input
Signal ground
Binary output
Table 10: Connection of I/O port
20
LR77 v2
Data flow direction
Input/Output
Input/Output
Data flow direction
Input
Output