Front Panel Lr77 V2F(G); Front Panel Description - Advantech B+B SmartWorx LR77 v2 User Manual

5.7 Description of the front panel
On the front panel is the following:
Caption Connector
PWR 2-pin
ETH RJ45
PORT1 RJ45
PORT2 RJ45
ANT SMA
DIV SMA
GPS SMA
WIFI R-SMA
WMBUS SMA
USB USB-A Host
I/O 3-pin
SIM1 —
SIM2 —
Description
Connector for the power supply.
Connector for connection into the local computer network.
Connector for expansion port RS232, RS458/422, MBUS,
ETHERNET, CNT or SWITCH.
Connector for expansion port RS232, RS485/422, MBUS,
SWITCH, WIFI, WMBUS or SDH (only FULL versions).
Connector for main antenna.
Connector for diversity antenna.
Connector for GPS antenna. It can be replaced with connec-
tor for WIFI or WMBUS antenna.
Connector for WIFI antenna. Available only when the
router is equipped with an expansion port WIFI.
Connector for WMBUS antenna. Available only when the
router is equipped with an expansion port WMBUS.
Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
Connector for connection of the binary input and output.
Holder for the first SIM card.
Holder for the second SIM card (only FULL versions).
Table 5: Front panel description
Figure 22: Front panel LR77 v2F(G)
13
LR77 v2