Specifications
For specifications on the available PoE ports, refer to
Specifications (Page
4.3
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
1
1
2
Figure 4.6
1
1
2
Figure 4.8
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.4
SFP Transceivers
The RUGGEDCOM RSG2100PF supports up to two Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Yellow (Solid)
RUGGEDCOM RSG2100PF
Installation Manual, 07/2021, C79000-G8976-1345-11
29)".
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
State
"PoE Power Supply
1
Tx Connector
1
Rx Connector
2
Figure 4.7
2
1
Tx Connector
1
Rx Connector
2
Figure 4.9
31)".
Link established
Communication Ports
4.3 Fiber Optic Ethernet Ports
2
LC Port
2
ST Port
"Fiber Optic
Description
25