Introduction - Ebyte E180-Z5812SX Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

1 Introduction

1.1 Product Introduction
E180-Z5812SX is a ZIGBEE module designed and produced by Chengdu Ebyte
based on the TELINK TLSR8258 wireless SOC. It has a small size, low power
consumption, high reliability, and works in the 2.4GHz frequency band. The chip comes
with a 32-bit high-performance MCU up to 48Mhz. The maximum transmit power can
reach 12dBm, and its lowest period sleep current is 2uA.
TLSR8258 is a wireless microcontroller with great potential to become the first
choice for future smart furniture, IoT transformation, and industrial automation. Its
network characteristics comply with the ZIGBEE 3.0 standard and provide a complete
application integration solution based on the IEEE802.15.4 standard ISM frequency band. The product has been tested and
certified by a series of authoritative radio frequency instruments, combined with years of market experience and the actual needs
of users in the industry, integrates the extremely complex communication protocol of wireless products into the built-in SoC,
supports serial transparent transmission mode, and integrates quickly and easily The self-organizing network function used
provides multi-channel configurable ADC, IO, and PWM interfaces, which can simplify the complicated development process of
wireless products and make your products quickly put into the market at a lower cost.
1.2 Features
Centralized network management: ZIGBEE 3.0 security standard centralized network access mechanism, data security and

reliability;
Large capacity: 512K capacity flash, 64K capacity RAM, network nodes can be expanded to more than 100;

Role switching: The user can switch the device between two types of terminal and dormant terminal arbitrarily through

serial port commands;
Support multiple network topologies: point-to-point, star network, MESH network;

Network self-healing: If the intermediate node of the network is lost, other networks will automatically join or maintain the

original network;
Address search: Users can find the corresponding short address according to the MAC address of the node that has been

added to the network, and at the same time find the corresponding long address of each node in the network according to
the short address of the node.
Data security: Integrated ZIGBEE 3.0 security communication standard, the network contains multi-level security keys;

Serial port configuration: The module has built-in serial port commands, and users can configure (check) the parameters

and functions of the module through the serial port commands.
Network PAN_ID change: Any switch of network PAN_ID, users can customize PAN_ID to join the corresponding

network or automatically select PAN_ID to join the network;
GPIO control: local/remote GPIO level control, 2 IOs can be selected;

PWM control: local/remote PWM control, 4 PWM channels for users to choose;

ADC control: local/remote ADC reading, 3 ADC channels for users to choose (including power supply voltage detection);

One key to restore the baud rate: If the user forgets or does not know the baud rate, this function can be used to restore the

Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SX User Manual
2