Ebyte E180-Z5812SX Manual page 32

Chengdu Ebyte Electronic Technology Co.,Ltd.
6.6.25Configure serial port wake-up hold time
Command format for Read:
Command Format
Send: FE 01 36 FF
Reply: FB 36 Uart_holdtime
Command format for Configuration:
Command Format
Send: FD 01 36 Uart_holdtime FF
Reply: FA 36
Uart_holdtime: 1～255, the unit is 10ms, the default parameter is 100, that is, the serial port will keep waking up for 100*10ms after
waking up, and then going to sleep after 1000ms.
6.6.26Configure Nodes information
Command format for Read:
Command Format
Send: FE 05 37 FF
Reply: FB 37 Endpoint_info
Command format for Configuration:
Command Format
Send: FD 05 37 Endpoint_info FF
Reply: FA 37
Endpoint_info:5 bytes, the data format is: endpoint clusterId_H clusterId_L profileId_H profileId_L
Default parameters: endpoint 0x01, clusterId 0xfeb0, profileId 0x0504。
endpoint
01
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
Command Example
Send: FE 01 36 FF
Reply: FB 36 64
Command Example
Send: FD 01 36 64 FF
Reply: FA 36
Command Example
Send: FE 05 37 FF
Reply: FB 37 01 FE B0
05 04
Command Example
Send: FD 05 37 01 FE B0
05 04 FF
Reply: FA 37
clusterId
clusterId_H clusterId_L
FE B0
E180-Z5812SX User Manual
profileId
profileId_H profileId_L
05 04
31