Ebyte E180-Z5812SX Manual page 11

Chengdu Ebyte Electronic Technology Co.,Ltd.
otherwise it may cause data congestion.
5.2 Modes of Receiving Data
The received data output mode refers to the way in which the serial port outputs data after the module receives
wireless data
.
5.2.1 Transparent Output
If the output mode of the configuration device is transparent output, the module will output the original data
through the serial port after receiving the wireless data.
5.2.2 Data + Short Address
When the output mode of the device is data + short address, after the module receives the wireless data, the
serial port will output the original data + the short address of the sending device.
5.2.3 Data + Long Address
When the output mode of the device is data + long address, after the module receives wireless data, the serial port will output the
original data + the long address of the sending device;
Note: The terminal device can resolve the long address of the sending device such as coordinator, router and terminal, but the
coordinator and router cannot resolve the long address of the terminal sending device
The coordinator and router here are E180-ZG120A/B products.
5.2.4 Data+RSSI
When the output mode of the device is data + RSSI, after the module receives the wireless data, the serial port
will output the original data + the RSSI value of the received data packet.
5.2.5 Data + Short Address+RSSI
When the output mode of the device is data + short address + RSSI, after the module receives the wireless data,
the serial port will output the original data + the short address of the sending device + the RSSI value of the
received data packet.
5.2.6 Data + Long Address+RSSI
When the output mode of the device is data + long address + RSSI, after the module receives the wireless data,
the serial port will output the original data + the long address of the sending device + the RSSI value of the
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SX User Manual
10