Ebyte E180-Z5812SX Manual page 19

Chengdu Ebyte Electronic Technology Co.,Ltd.
Device restart
reset
Configure the delayed printing
time for AUX to wake up the
external MCU serial port in the
wireless receiving state
Configure serial port wake-up hold
time
Configure endpoint information
Configure the trust center
connection key
6.5.3 Commands for Network Configuration
Open Network
Leave Network
New Network
Open Network: The main coordinator node is effective, which means that the open network allows the terminal to
join for a period of time. The command configures the "centralized network open time" parameter. This command
is invalid for the terminal and the sleeping terminal. Only the coordinator node (E180-ZG120A/B) is valid .
Leave Network: The coordinator executes this command to clear the original network, and at the same time creates
a new network. The terminal node executes this command to clear the saved network, and then executes the restart
or new network command to join the new network.
New Network: mainly for terminals, execute this command to join a new network, you need to leave the network
and then execute the new network to join the new network.
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
FF
Reply: FA 21
Send: FD 00 12 FF
Reply: FA 12
Send: FD 00 13 FF
Reply: FA 13
Send: FD 01 35 AUX_delaytime FF
Reply: FA 35
Send: FD 01 36 Uart_holdtime FF
Reply: FA 36
Send: FD 05 37 Endpoint_info FF
Reply: FA 37
Send: FD 10 38 TrustCentLinkKey FF
Reply: FA 38
Send: F5 01 40 01 FF
Reply: FC 40 00
Send: F5 01 40 02 FF
Reply: FC 40 00
Send: F5 01 40 03 FF
Reply: FC 40 00
E180-Z5812SX User Manual
Reply: FA 21
Send: FD 00 12 FF
Reply: FA 12
Send: FD 00 13 FF
Reply: FA 13
Send: FD 01 35 04 FF
Reply: FA 35
Send: FD 01 36 64 FF
Reply: FA 36
Send: FD 05 37 01 FE B0
05 04 FF
Reply: FA 37
Send: FD 10 38
5A 69 67 42 65 65 41 6C
6C 69 61 6E 63 65 30 39
FF
Reply: FA 38
Send: F5 01 40 01 FF
Reply: FC 40 00
Send: F5 01 40 02 FF
Reply: FC 40 00
Send: F5 01 40 03 FF
Reply: FC 40 00
18