Ebyte E180-Z5812SX Manual page 21

Chengdu Ebyte Electronic Technology Co.,Ltd.
Note: The dormant terminal device does not support the resolution of the long address of the source device when receiving data. When
the terminal device receives data, it can resolve the long address of the source sending device such as the coordinator, router and
terminal, but the coordinator and router cannot resolve the source sending device of the terminal. The long address, the coordinator and
router here are E180-ZG120A/B products.
Note: The sender supports a single packet with a maximum data packet length of 72 bytes
6.6.3 Types of Network Devices
Command format for Read:
Command Format
Send: FE 01 01 FF
Reply: FB 01 dev_type
Command format for Configuration:
Command Format
Send: FD 01 01 dev_type FF
Reply: FA 01
Dev_type:
0x03 terminal (default)
0x04 Sleep terminal
The configuration of changing the node type needs to be restarted to take effect. During normal operation,
the device configured with the node type will leave the current network in a non-network state, and will switch
to the changed node type after restarting. The dormant terminal supports the wake-up function of the serial port
receiving pin. The length of the wake-up frame is less than or equal to 5 bytes. It is recommended to use "FF FF
FF FF FF" 5 bytes to wake up.
6.6.4Network Status
Command format for Read:
Command Format
Send: FE 01 02 FF
Reply: FB 02 nwk_state
nwk_state:
0x00 No network
0x02 has joined the network
0x03 There is a network but no parent node
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
Command Example
Send: FE 01 01 FF
Reply: FB 01 03
Command Example
Send: FD 01 01 03 FF
Reply: FA 01
Command Example
Send: FE 01 02 FF
Reply: FB 02 02
E180-Z5812SX User Manual
20