Ebyte E180-Z5812SX Manual page 27

Chengdu Ebyte Electronic Technology Co.,Ltd.
6.6.17 Maximum number of reconnection attempts
Command format for Read:
Command Format
Send: FE 01 30 FF
Reply: FB 30 net_rejoincount
Command format for Configuration:
Command Format
Send: FD 01 30 time FF
Reply: FA 30
Rejoin maxcount:
(1～254) The range of maximum reconnection times is 1～254 times, the default is 10
After the node is running, if the parent node is lost or there is a network without a parent node, the maximum number of rejoin
attempts are attempted after power-on. If the previous network has not been restored, the previous network information will be cleared,
and new networks will be scanned periodically to join with the Rejoin period. The power consumption of scanning the new network is
higher than the power consumption of the network before restoration.
When the parameter is 254, it means that reconnection is always executed without clearing the network when there is a network
without a parent node.
6.6.18 Wireless remote configuration ID
Command format for Read:
Command Format
Send: FE 02 31 FF
Reply: FB 31 header
Command format for Configuration:
Command Format
Send: FD 02 31 header FF
Reply: FA 31
Remote Header:
0x0000 means to close the wireless network configuration, 0x0001～0xFFFF means to open the remote configuration, the default
setting is 0xA88A (0xA8 0x8A).
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
Command Example
Send: FE 01 30 FF
Reply: FB 30 05
Command Example
Send: FD 01 30 05 FF
Reply: FA 30
Command Example
Send: FE 02 31 FF
Reply: FB 31 A8 8A
Command Example
Send: FD 02 31 A8 8A FF
Reply: FA 31
E180-Z5812SX User Manual
26