Chapter 1 Overview; Product Introduction; Features - Ebyte E180-Z5812SP Product Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

Chapter 1 Overview

1.1 Product Introduction

E180-Z5812SP is a ZIGBEE module designed and produced by Chengdu
Ebyte based on TELINK TLSR8258 wireless SOC with small size, low power
consumption, high reliability, and working in the 2.4GHz frequency band. The
chip comes with a 32-bit high-performance MCU up to 48Mhz. The transmit
power can reach up to 12dBm, and its minimum cycle sleep current is 2uA.
TLSR8258 is a wireless microcontroller with great potential to become the
first choice for smart furniture, Internet of Things transformation, and industrial
automation in the future. Its network characteristics conform to the ZIGBEE 3.0
standard and provide a complete application integration solution based on the
IEEE802.15.4 standard ISM frequency band. The product has been tested and
certified by a series of authoritative radio frequency instruments, combined with
years of market experience and the actual needs of users in this industry, the
extremely complex communication protocol of wireless products is integrated
into the built-in SoC, it supports serial port transparent transmission mode, and the integration is fast and easy The self-organizing
network function of the application provides multiple configurable ADC, IO, and PWM interfaces, which simplifies the
complexity and greatly simplifies the complex development process of wireless products, so that your products can be quickly put
on the market at a lower cost.

1.2 Features

Centralized network management: ZIGBEE 3.0 security standard centralized network access mechanism, data security and

reliability;
Large capacity: 512K capacity flash, 64K capacity RAM, network nodes can be expanded to more than 100;

Role switching: the user can switch the device between the two types of terminal and dormant terminal arbitrarily through

serial port commands;
Support multiple network topologies: point-to-point, star network, MESH network;

Network self-healing: if the intermediate node of the network is lost, other networks will automatically join or maintain the

original network;
Address retrieval: users can find out the corresponding short address according to the MAC address of the node that has

joined the network, and can also find out the corresponding long address of each node in the network according to the short
address of the node.
Data Security: Integrated ZIGBEE 3.0 security communication standard, the network contains multi-level security keys;

Serial port configuration: The module has a built-in serial port command, and the user can configure (view) the parameters

and functions of the module through the serial port command.
Network PAN_ID change: Any switching of the network PAN_ID, the user can customize the PAN_ID to join the

corresponding network or automatically select the PAN_ID to join the network;
GPIO control: local/remote GPIO level control, 2 IOs can be selected;

Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SP Product Manual
3