Ebyte E180-Z5812SX Manual page 20

Chengdu Ebyte Electronic Technology Co.,Ltd.
6.6 HEX Commands
6.6.1 System sending mode
Command format for Read:
Format
Send: FE 01 26 FF
Reply: FB 26 send_mode
Command format for Configuration:
Format
Send: FD 01 26 mode FF
Reply: FA 26
Modes:
0x01 Multicast (you need to configure the target group number in configuration mode first).
0x02 Transparent transmission on demand + short address (need to configure the target short address in
configuration mode).
0x03 transparent transmission on demand + long address (need to configure the target long address in
configuration mode).
0x04 Protocol on-demand + short address (the first two bytes in the transmission mode are the network short
address of the target device).
0x05 protocol multicast (the first byte in the transmission mode is the target network group number).
6.6.2 Commands for Output type when Receiving Data
Command format for Read:
Command Format
Send: FE 01 27 FF
Reply: FB 27 out_mode
Command format for Configuration:
Command Format
Send: FD 01 27 mode FF
Reply: FA 27
Mode:
0x00 transparent transmission (default).
0x01 data + short address.
0x02 data + long address.
0x03 data+RSSI;
0x04 data + short address + RSSI.
0x05 data + long address + RSSI.
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd.
Examples
Send: FE 01 26 FF
Reply: FB 26 02
Examples
Send: FD 01 26 02 FF
Reply: FA 26
Command Example
Send: FE 01 27 FF
Reply: FB 27 00
Command Example
Send: FD 01 27 00 FF
Reply: FA 26
E180-Z5812SX User Manual
19