Danfoss VLT Training Manual page 30

Hide thumbs Also See for VLT:

VLT Installation

4) Installation Checks

c. General Wiring Preparations

Most smaller drives have knock-outs for conduit entry. Larger drives provide a

removable conduit entry plate. It is important to remove this plate before drilling or

punching it.

When a drive is supplied with an auxiliary enclosure, it generally is necessary to drill

or punch conduit entry holes in the auxiliary enclosure. It is important to ensure

that metal chips or filings don't get into any of the devices which are housed in the

auxiliary enclosure.

Rev.02

c. General Wiring

General Wiring Preparations

• Locate terminals

• Typically wiring enters the lower part of drive

• Knock-outs are provided on many drives

• Larger drives have a removable conduit entry or

gland plate

Confidential / Property of Danfoss Drives A/S

North America

Motion Controls

Table of Contents