Reference Material - Danfoss VLT Training Manual

VLT Installation

2) Reference Material

a. Instruction Manual
Other Useful Information
b. Connection Diagram
c. Schematic Diagram
2) Reference Material
These three pieces of reference material may be available to you when you are
starting up a drive.
a) The VLT Instruction Manual provides general information on topics like mounting
clearances, fuses, terminal tightening torques, and drive parameters. An instruction
Manual is shipped with each drive.
From the Customer, a Connection Diagram may be available which provides a sketch
indicating the layout and use of the equipment in the system.
c) A Schematic Diagram from the customer could also provide details of the wiring
between the drive, any options, and the control system.
Rev.02
with each Drive
Confidential / Property of Danfoss Drives A/S
5
North America
Motion Controls