Catalog Number - Danfoss VLT Training Manual

VLT Installation
3) Pre-Installation Checks
Compare VLT model number with what was ordered.

Catalog Number

Sales Number
3) Pre-Installation Checks
d. Compare the VLT model number with what was ordered.
The drive has two identifying numbers, the catalog number and the sales number.
A Catalog Number, which is explained on the next slide, is the long number. In the
example above the catalog number is VLT 5011-P-T2-CN1-ST-R0-DL-F00-A00.
When ordered, the Catalog Number is converted into a Sales Number which is much
less cumbersome. In the example above, 178B3372 is the Sales Number.
The Serial Number, 805016H332 indicates the series, revision, place and date of
manufacturing, and is very important concerning warranty work. The last 3
numbers indicate the week followed by the year. In this example 332, means week
33 of 2002.
Input and Output ratings are also placed on the label for an additional check.
Rev.02
d. Compare drive
Confidential / Property of Danfoss Drives A/S
Serial Number
Output Ratings of Drive
9
North America
Motion Controls