Mounting The Firewall On A Workbench - H3C SecPath F1000-AI-X0 Installation Manual

Hide thumbs Also See for SecPath F1000-AI-X0:

Table of Contents

Figure2-1 Firewall installation flow

Mount the firewall on a

workbench

Mounting the firewall on a workbench

IMPORTANT:

• Ensure good ventilation and a minimum clearance of 100 mm (3.94 in) around the chassis for

heat dissipation.

• Avoid placing heavy objects on the firewall.

• To stack firewalls, make sure a minimum vertical distance of 15 mm (0.59 in) is available between

two adjacent firewalls.

If a standard 19-inch rack is not available, you can place the firewall on a workbench.

Start

Determine the

installation position

Ground the firewall

Install power supplies

Install interface modules

Install drives

Connect interface

cables

Connect power cords

Verify the installation

End

Mount the firewall in a

19-inch rack

Table of Contents

Do you have a question about the SecPath F1000-AI-X0 and is the answer not in the manual?