Ducati MULTISTRADA 950 Owner's Manual page 34

Indicates ABS status.
- Light off: ABS enabled and functioning;
- Light ON flashing: ABS in self-diagnosis and/or
functioning with degraded performance;
- Light steady ON: ABS disabled and/or not
functioning due to a fault in the ABS control
unit.
11) GENERIC ERROR WARNING LIGHT.
It turns on when there are any "vehicle" errors, i.e.
active errors triggered by any control unit other than
the engine control unit.
12) OVER REV / IMMOBILIZER SYSTEM WARNING
LIGHTS (RED)
Over rev:
- Light OFF: no limiter intervention;
- Warning light steady ON: limiter first
intervention threshold;
- Warning light flashing: limiter intervention.
Note
Each calibration of the Engine Control Unit may
have a different setting for the thresholds that
precede the rev limiter and the rev limiter itself.
Immobilizer:
- Light OFF: key-on status or key-off status for
over 24 hours;
- Light ON flashing: key-off status;
13) DTC INTERVENTION WARNING LIGHTS
- Light OFF: no DTC intervention.
- Warning light ON: DTC intervention
14) VHC (Vehicle Hold Control) WARNING LIGHT
It turns on upon activation of the VHC system: the
ABS of the Multistrada is equipped with the Vehicle
Hold Control (VHC) system. This system, when
activated, keeps the vehicle at a standstill by quickly
activating the rear brake: the warning light remains
steady. The warning light starts blinking when the
VHC system is about to release the rear brake
pressure and thus to stop keeping the vehicle at a
standstill: pressure is decreased gradually. The
warning light turns off when the VHC system is
disabled.
33