When entering this setting function, the first
parameter to be set is AM / PM (flashing) (A). Use
buttons (1) and (2) to toggle from "AM" to "PM" and
vice versa.
Press button (4) to shift to hour setting (hours will
start flashing) (B). Use buttons (1) and (2) to increase
and decrease by 1 the hour value.
Press button (4) to shift to minute setting, (minutes
will start flashing) (C). Use buttons (1) and (2) to
increase and decrease by 1 the minute value.
When button (4) is pressed to confirm the minute
parameter, the instrument panel quits the function
by saving the set time.
120
A
B
C
1
4
2
Fig 73