Appendix; Removing And Replacing Burners - Cal Flame BBQ10900 Owner's Manual

Appendix

Removing and Replacing Burners

1. Disconnect or shut off the gas line connect to the grill. Wait until
the grill and burners are cool.
2. Remove the cover and
the griddle.
3. Pull the grill forward part-
ly out of the cut-out.
4. Through the access be-
hind the grill, find the
round stud and locking
pin that locks the burner
you want to remove. (See
picture at right.)
5. Carefully remove
locking pin.
6. Lift the burner, raising
the stud from the locking
hole and pull the burner
back carefully to release
it from the ignition and
gas supply valve.
7. Take the burner out of
the grill and store it in a
safe and dry place.
8. To replace burners, follow
these steps in reverse.
Hibachi Grill
LTR50001096, Rev. A
the
21
www.calflamebbq.com