Table of Contents
Advertisement
Display Setting Menu
Overview
This menu is used for setting the monitor condition such as the color reproduction or frame.
When Display Setting is selected, the following menu is displayed.
iDisplay Setting
User Matrix/Gamma
B
Native Scan Mode:
xxx
Aperture Value:
xxx
NTSC Comb Filter:
xxx
Filter Switch:
xxx
xxx
Peak White Control:
Menu Function and Operation
Menu
User Matrix/Gamma
User Data
Matrix
Gamma
Copy From
Preset Value
Other Monitor
Monitor ID
Function and operation ([
Sets the user data (User1 to User5) of Matrix/Gamma (transmission matrix and transmission
gamma).
As the signal is processed internally by the data setting of Matrix/Gamma, the signal may not
be displayed correctly, if the signal is not set according to the transmission standards for the
input signal.
For the transmission gamma and the transmission matrix of Matrix/Gamma, see the Matrix/
Gamma menu (page 54) of the Input Configuration menu.
Selects the user data of Matrix/Gamma.
You can select from User1 to User5. [User1]
Sets the transmission matrix.
[ITU709]: Matrix of ITU-R BT.709 standards
ITU601: Matrix of ITU-R BT.601 standards
SMPTE 240M: Matrix of SMPTE-240M standards
Note
The internal fixed value applies to the transmission matrix of the RGB format.
Sets the transmission gamma.
[2.2]: Transmission gamma 2.2
xvYCC: Transmission gamma of IEC 61966-2-4 standards (xvYCC)
Notes
• When you select xvYCC, set Emulation (page 55) to PVM-L1700 Native in the Color Gamut
menu of the Input Configuration menu to display the extended color gamut area.
• When the quantization range of the DVI signal or HDMI signal is Full, the internal fixed
value of the transmission gamma is applied.
Copies the user data from the other Matrix/Gamma.
Copies other data in this monitor.
When the item is selected, you can select from User1, User2, User3, User4 or User5.
Copies data from another monitor.
Enter the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the ID number is entered, you can select from User1, User2, User3, User4 or User5.
]: factory setting)
57
Display Setting Menu
Advertisement
Table of Contents
