Display Setting Menu; Overview; Menu Function And Operation - Sony bvm-l230 Operation Manual

Display Setting Menu

Overview

This menu is used for setting the monitor condition such as the color reproduction or frame.
When Display Setting is selected, the following menu is displayed.
iDisplay Setting
Color Gamut B
User Matrix/Gamma B
Native Scan Mode:
Aperture Value:
NTSC Comb Filter:
Filter Switch:
Peak White Control:

Menu Function and Operation

Menu
Color Gamut
Emulation
User LUT
User LUT Data
File
Emulation
56
Display Setting Menu
xxx
xxx
xxx
xxx
xxx
Function and operation ([
As the BVM-L230 is equipped with the wider color space LED backlight, the signal can be
displayed (emulation) in the color gamut (color space and gamma) selected in the Emulation
menu.
Sets the used color gamut (color space and gamma).
BVM SMPTE-C: Displays in the color gamut of BVM-A24 SMPTE-C phosphor CRT.
BVM EBU: Displays in the color gamut of BVM-A24 EBU phosphor CRT.
ITU-R BT.709: Displays in the color gamut of three primary colors chromaticity point
provided by ITU-R BT.709.
1
D-Cine* : Displays in the color gamut of three primary colors chromaticity point provided
by SMPTE RP 431-2.
L230 Native: Displays in the color gamut of the BVM-L230 individual three primary
colors chromaticity point. This is the widest color space setting of the signal reproduced
by the BVM-L230.
S-GAMUT: Sets to display the color gamut of the wide color space mode S-GAMUT,
which is available for the F23 Digital Cinematography Camera.
*1Three primary colors chromaticity point provided by SMPTE RP 431-2 is not covered in full.
Note
When User LUT is set to Applied, you cannot set Emulation.
Sets whether or not to apply the user data for the Emulation setting ([Not Applied] or
Applied).
If the user data are not prepared, you cannot set User LUT.
Selects the user data.
You can select from User1, User2, User3, User4 or User5. [--- (no setting)]
Note
The user data without a LUT data file is not displayed and cannot be selected.
The read LUT data file name is displayed.
The reference color gamut for making the LUT data are displayed.
When User LUT is set to Applied, Emulation is forcibly set to the color gamut displayed in this
menu inside the monitor.
]: factory setting)