Sony PVM-L1700 Operation Manual page 26

Monitor
Controller (BKM-16R)
1
Turn off the ON/OFF (power) switch of the monitor
(OFF) before connecting the units.
2
Connect to the network by using a 10BASE-T/
100BASE-TX cable (shielded-type, optional).
Notes
• When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
• We recommend to use an optional switching hub
with auto selection function (AUTO MDI/MDI-X)
of a straight/cross cable.
When the switching hub without auto selection
function is used, connect the monitor and switching
26
Connections
NETWORK
PEER TO
LAN
PEER
Set to LAN.
AC adaptor (supplied
with the BKM-16R)
DC 5V/12V IN
connector
NETWORK
LAN
PEER TO PEER
Set to LAN.
Monitor
LAN (10/100)
connector
Switching hub
(recommended: with
AUTO MDI/MDI-X
function)
LAN (10/100)
connector
hub with the straight cable, and the controller and
switching hub with the cross cable.
3
Connect the output cable on the AC adaptor supplied
with controller to the DC 5V/12V IN connector of the
controller.
Note
When the multiple units are connected, set for the LAN
before setting the NETWORK switch to LAN (page
29).
4
Set the NETWORK switches of each monitor and the
controller to LAN.
LAN (10/100)
NETWORK
connector
PEER TO
LAN
PEER
Set to LAN.