Please Read This First - Carlin EZ-66 Instruction Manual

Carlin Select EZ-66 Oil/Bio Fuel Burner Instruction Manual

PLEASE read this first . . .

Special attention flags
Please pay particular attention to the following when you see them through-
out this manual.
Notifies you of hazards that WILL cause severe personal injury,
death or substantial property damage.
Notifies you of hazards that CAN cause severe personal injury,
death or substantial property damage.
Notifies you of hazards that WILL or CAN cause minor personal
injury or property damage.
Notifies you of special instructions on installation, operation or
maintenance that are important, but are not normally related
to injury or property damage hazards.
General information
Burner applications
Follow all instructions in this manual, the primary control data sheet and
the appliance manual. Verify the burner is correct for the appliance being
used and for all applicable codes/standards.
Damage or shortage claims
The consignee of the shipment must file damage or shortage claims im-
mediately against the transportation company.
When calling or writing about the burner . . .
Please provide us with the UL serial number and burner model number
to assist us in locating information. This information can be helpful when
troubleshooting or obtaining replacement parts.
Should overheating occur:
(1) Shut off the oil supply to the burner.
(2) Do not shut off the control switch to the circulator or blower.
Optional Burner Cover with air intake adapter
• Carlin's optional burner cover is available on all residential burner
models firing under 3 GPH.
• Combustion air can be taken from the room or can be piped to the
burner cover when the optional air intake adpater is installed. (Requires
Field CAS-1 combustion air system.)
• See separate instructions provided with the cover for installation and
special instructions required with the cover
– 2 –
Follow the guidelines below to avoid potential severe
personal injury, death or substantial property damage.
Installer/service technician . . .
• Read all instructions before proceeding. Perform all procedures,
and in the order given to avoid potential of severe personal injury,
death or substantial property damage.
• Before leaving the site after startup or service, review the User's
information page with the user. Make the user aware of all potential
hazards and perform the training outlined below.
Train the user . . .
• To properly operate the burner/appliance per this manual and the
appliance instructions see User's information.
• To keep this manual at or near the burner/appliance for ready ac-
cess by the user and service technician.
• To contact the service technician or oil dealer if he encounters
problems with the burner/appliance.
• To keep the appliance space free of flammable liquids or vapors
and other combustible materials.
• Do not use laundry products, paints, varnishes or other chemicals
in the room occupied by the burner/appliance.
• To contact the service technician at least annually for startup and
burner/appliance service.
When servicing the burner . . .
• Disconnect electrical supply to burner before attempting to service
to avoid electrical shock or possible injury from moving parts.
• Burner and appliance components can be extremely hot. Allow
all parts to cool before attempting to handle or service to avoid
potential of severe burns.
When using a burner with a nozzle, it is the in-
staller's responsibility to verify correct nozzle
is installed and properly tightened.
MN66-3P 090721