Please Read This First; Codes And Standards - Carlin EZ-1-HP Instruction Manual

PLEASE read this first . . .

Special attention flags
Please pay particular attention to the following when you see them
throughout this manual.
Notifies you of hazards that WILL cause severe personal
injury, death or substantial property damage.
Notifies you of hazards that CAN cause severe personal
injury, death or substantial property damage.
Notifies you of hazards that WILL or CAN cause minor
personal injury or property damage.
Notifies you of special instructions on installation, op-
eration or maintenance that are important, but are not
normally related to injury or property damage hazards.
General information
Burner applications
Follow all instructions in this manual, the primary control data sheet
and the appliance manual. Verify the burner is correct for the appli-
ance being used and for all applicable codes/standards.
Damage or shortage claims
The consignee of the shipment must file damage or shortage claims
immediately against the transportation company.
When calling or writing about the burner . . .
Please provide us with the UL serial number and burner model
number to assist us in locating information. This information can
be helpful when troubleshooting or obtaining replacement parts.
Burner options . . .
Optional Burner Cover with air intake adapter
• Carlin's optional EZ-burner cover is available on all
EZ-LF-1/2/3 models.
• Combustion air can be taken from the room or can be piped
to the burner cover when the optional air intake adpater is
installed. (Requires Field CAS-1 combustion air system.)
• See separate instructions provided with the cover for in-
stallation and special instructions required with the cover.
Optional P/N 97406 Air Intake System (EZ-1 only)
• Carlin's 97406 Air Intake System may be supplied with
model EZ-LF-1 burners only. (Also requires Field CAS-1
combustion air system.)
• The air intake adapter is bolted to the burner housing. The
adapter includes air shutter and indicator.
• See separate instructions provided with the cover for in-
stallation and special instructions required with the cover.
– 2 –
Model EZ-1/2/3 oil burners — Instruction manual
Should overheating occur:
1. Shut off the oil supply to the burner.
2. DO NOT shut off the control switch to the
circulator or blower.
Follow the guidelines below to avoid potential
severe personal injury, death or substantial
property damage.
Installer/service technician . . .
• Read all instructions before proceeding. Perform all
procedures, and in the order given to avoid potential
of severe personal injury, death or substantial prop-
erty damage.
• Before leaving the site after startup or service, review
the User's information page with the user. Make the
user aware of all potential hazards and perform the
training outlined below.
Train the user . . .
• To properly operate the burner/appliance per this
manual and the appliance instructions see User's
information.
• To keep this manual at or near the burner/appliance
for ready access by the user and service technician.
• To contact the service technician or oil dealer if he
encounters problems with the burner/appliance.
• To keep the appliance space free of flammable liquids
or vapors and other combustible materials.
• Do not use laundry products, paints, varnishes or
other chemicals in the room occupied by the burner/
appliance.
• To contact the service technician at least annually
for startup and burner/appliance service.
When servicing the burner . . .
• Disconnect the electrical supply to the burner before
attempting to service to avoid electrical shock or pos-
sible injury from moving parts.
• Burner and appliance components can be extremely
hot. Allow all parts to cool before attempting to handle
or service to avoid potential of severe burns.
MNEZ123 072916