Epson FX-870 User Manual page 41

Using Continuous
Installing in the rear push-tractor position
1. Make sure the printer is turned off.
2. Lift the paper guide up and off the printer.
3. While pressing in the tractor's lock tabs, lower the tractor
straight down into the printer's mounting slots. Press on both
ends to make sure the tractor is firmly seated.
See page 2-13 for instructions on loading paper with the rear push
tractor.
To remove the tractor unit, press the tractor's lock tabs, tilt the unit,
and lift it off the printer.
Installing the pull tractor
You can also use the tractor unit as a pull tractor. To do this, remove
the paper-tension unit and install the tractor unit in its place. Follow
the steps below to install the pull tractor.
1. Make sure the power is turned off.
2. Lift the printer cover up and off the printer.
3. Using the tabs on the paper-tension unit, grasp both ends of the
unit and lift it up and off the printer. Store the paper-tension unit
in safe place.
2-8 Paper Handling
Paper