Running The Self Test - Epson FX-870 User Manual

Running the self test

You can run the self test with continuous paper or single sheets.
Also, you can load paper for the test from the rear, front, top, or
bottom. The following steps describe how to run the test using a
single sheet of paper, loaded from the top. See Chapter 2 for full
details on paper handling.
The printer prints the self test using the currently selected font.
1. Make sure that the printer is turned off. Move the paper-release
lever to the single-sheet position.
2. Hold down the
The printer beeps several times and the
PAPER FEED
button while you turn on the printer.
Testing the Printer
READY
light blinks.
Setting Up the Printer 1-11