Setting Up The Printer - Epson FX-870 User Manual

The printer prints the default settings, followed by font samples
for each of the printer's available fonts.
5. The self test continues until the paper runs out or until you press
PAUSE
the
sheet of paper to continue printing font samples. When you wish
to stop the test temporarily, press the
the test, press the
6. While holding down the
eject the paper. Then turn off the printer to end the self test.
Here is part of a typical self test.
- - -
S h a p e o f zercl
T e a r o f f
length
Note: If the self test does not print properly, see Chapter 6.
button. When the printer beeps, you can load another
PAUSE
button again.
ALT
H o skip
0
11 irlChC?!5
PAUSE
button, press the

Setting Up the Printer

Testing the Printer
button. To resume
EJECT
button to
1-13