Removing Paper From The Rear Push Tractor - Epson FX-870 User Manual

6. Close the sprocket covers.
7. Adjust the right sprocket to remove any slack in the paper; then
lock it in place.
8. Attach the paper guide in its flat position over the printer. Slide
the edge guides to the center.
9. Turn on the printer. When the printer receives data, it loads the
paper automatically before printing.
Note: You can also advance the paper to the loading position by
PAPER FEED
pressing the
0 t
CAUTION: Always turn off the printer before you use the
knob on its left side to clear paper jams. If the printer is on,
you may damage it or lose the top-of-form position.

Removing paper from the rear push tractor

1. To remove continuous paper, press the
the paper's perforation to the tear-off edge of the printer cover.
Note: If the page perforation does not meet the tear-off edge, you
can adjust the tear-off position using the micro-feed feature. See
Chapter 3.
2. Tear off the paper.
3. While holding down the
feed the continuous paper backward out of the printer and into
the paper-park position.
CAUTION: Make sure you tear off your printed
document before holding down the
button.
TEAR OFF
ALT
button, press the
Using Continuous Paper
button to feed
EJECT
button to
ALT
button and
Paper
Handling 2-15