Removing Paper From The Front Push Tractor - Epson FX-870 User Manual

Using Continuous
5. Make sure your paper has a clean, straight edge. Open both
sprocket covers and fit the first four holes of the paper over the
sprocket pins.
6. Close the sprocket covers.
7. Adjust the right sprocket to remove any slack in the paper. Lock
the sprocket unit in place by pulling the sprocket lock forward.
8. Attach the front cover.
9. Turn on the printer. When the printer receives data, it
automatically loads the paper before printing.

Removing paper from the front push tractor

1. To remove continuous paper, press the
the paper's perforation to the tear-off edge of the printer cover.
Note: If the page perforation does not meet the tear-off edge, you
can adjust the tear-off position using the micro-feed feature. See
Chapter 3.
2. Tear off the paper.
3. While holding down the
feed the continuous paper backward out of the printer and into
the paper-park position.
Paper
Handling
2-12
Paper
ALT
TEAR OFF
button, press the
button to feed
EJECT
button to