Default-Setting Mode; Default-Setting Listing - Epson FX-870 User Manual

Default-Setting Mode

Default-setting listing

Your printer has internal settings that control such functions as
emulation, character pitch, and page length. These settings are
called default settings because they take effect each time you turn on
the printer.
For most users, the factory settings are best, but you can change
these settings if necessary.
This section lists the settings, describes them, and then tells how to
change them. If you see something in the list that you need to
change, notice which group (1, 2, 3, or 4) it is in and check the
description for further information, then see the section on changing
the settings for the group it is in.
Group 1 Features
Printer mode
Character pitch
Skip-over-perforation
Shape of Zero
Tear off
Auto line feed
Group 2 Features
Character table
*
Available only in the European version.
Available only in the North/South American version.
Group 3 Features
Page length
Settings
EPSON ESC/P or IBM emulation
No skip or skip 1 inch
Unslashed 0 or slashed 0
Valid or invalid
Depends on interface or valid
Settings
Italic Germany,
Italic Sweden,
PC437 Greek*,
USSR GOST',
IBM: PC437 (table l), PC437 (table 2) PC865
(table l), PC865 (table 2)
Settings
11, 12, 8.5, 70/6 (A4), 5.5, 7, 17, 14, 8, 6, 4, 3.5,
and 3 inches
Italic U.K., Italic Denmark,
Italic Spain,
Italic Italy,
Pca63,
Using the Printer
Pca65,
3-5