Use The Reset Button; Boot From Battery - Arris Touchstone TM804 User Manual

DS
On
On

Use the Reset button

Use the Reset button on the back of the Telephony Modem to reset and initialize the
modem as if you had power cycled the unit. You may need to reset the Telephony Modem if
you are having problems connecting to the Internet. You will not use this button often.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
Note: The rear panel power switch can also be used to power cycle the unit.
1. Tel (1 - 2): Connector for the first phone line (or both lines of a 2-line phone).
2. Tel 2: Connector for the second phone line.
3. Tel (3 - 4): Connector for the third phone line (or both lines of a 2-line phone).
4. Tel 4: Connector for the fourth phone line.
5. Reset button: Resets the Telephony Modem as if you power cycled the device. Use a
pointed non-metallic object to press this button.
6. Ethernet connector: Connector for use with a computer LAN port.
7. Cable: Connector for the coaxial cable.
8. Power: Connector for the power cord.

Boot from battery

The TM804 supports a "boot from battery" feature that allows the Telephony Modem to
begin service without AC power.
1. If a battery is already instealled in the Telephony Modem, remove it.
2. Re-insert the battery into the Telephony Modem. (See
(TM804G only)
Touchstone TM804 Telephony Modem User Guide STANDARD Revision 1.2
US Online
On
On
(page 17) for more information.
Chapter 6: Operate the Telephony Modem
Flash Downstream and upstream
found; retriving setup
information from service provider
On
Install and replace the battery
Description
Ready for service
35