The table below describes the three ways that the printer can be
initialized (returned to a fixed set of conditions).
Software initialization
Default settings
The following table shows the default conditions that become valid
when the printer is initialized.
Top of form position
Page length
Left and right margins
Line spacing
Condensed mode
Justification
I
Graphic mode assignment
User-defined character set
The pnnter recerves an lNiT srgnai at the parallel
l
The software sends the ESC @ (initialize the
l
printer) command.
I
Last setting by TOP OF FORM button
The current DIP switch setting
Every eight characters
The current DIP switch setting
Left justification
The current DIP switch settings where applicable.
Other effects are cancelled.
Epson ESClP mode: not cleared
IBM emulation mode: cleared
Technical Specifications
Default condition
I
8-17