Epson DFX-8000 User Manual page 115

Using the Paper Memory Feature
Saving information for overlappb multi-part forms-with labels
To save paper format and thickness information for multi-part
forms 'that overlap slightly and have 'labels on
steps below.
Load the overlapping multi-part forms with labels onto the front
1.
tractor. (See the section on lqqdingpaper onto the front tractor
in Chapter 2.)
Turn off the printer.
2.
Use DIP switch 3-4 to select the memory area where you want
3.
the printer to store the paper format and thickness information.
Memory area 1 is selected when DIP switch
the printer's default setting.) To select memory area 2, turn on
the switch.
Use DIP switch 3-2 to set the page length. The page length is
4.
inches when DIP switch
is on. If you plan to use forms of a different page length, use
software commands to set the page length after you finish
saving the form's information.
Turn on DIP switches
5.
want to save information for multi-part forms that overlap
slightly and have labels on them.
Note: Whenever DIP switch
feature is valid, regardless of DIP switch 3-3's setting.
Follow steps
6. .
Using the Printer
3-30
3-2
and
3-5
3-5
through on pages
6 14
is off and inches when the switch
12
This tells the printer you
3-6.
is on, the skip over perforation
through 3-29.
3-25
them, follow
the
is off. (This is
3-4
11