Epson DFX-8000 User Manual page 157

8
4
2
1
The numberg for the second line were calculated in the same way.
Once the numbeq for the pin patty are calculated, they are put
in the pqgram. in. DATA statements, separated by commas.
The following program is similar to the example on page
program selects 7/7%inch line spacing because only seven pins are
used. Because the data is not repetitive, each column of graphics
data is read from the DATA statements and sent to the printer. The
design is dot positions wide, therefore, both lines
use the number
FOR COLDMN-1 TO 41
NEXT COLUMN
41.
Software a n d Graphics
Graphics
2
This
4-16.
and
130 140
4-19