Epson DFX-8000 User Manual page 273

Epson ESC/P Commands Arranged by Topic
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the page length to n inches. The value of n must be from 1
to 22. The top of form position is set to the current line.
Overrides the DIP switch page length setting.
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : OC
Comments:
Prints the data in the print buffer and advances the paper to the
top of the next form according to the current page length.
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The variable
line printed on one page and the first line of the next page. For
example, with the standard settings for line spacing (l/6-inch),
and page length (66 lines), ESC N 6 cause the DFX-so00 to print
function. This setting is cancelled by ESC 0 and also by ESC C
or ESC C 0. The value of
l-inch skip over perforation setting of DIP switch 3-3.
Command Summary
9-14
is the number of lines skipped between the last
must be from 1 to 127. Overrides the
Set Page Length in Inches
0
0
Set Skip Over Perforation
Form Feed