Saving Paper Format And Thickness Information - Epson DFX-8000 User Manual

WARNING:
thickness, do not press the TEAR OFF, FRONT/REAR, or
reverse-feeding (bottom) MICRO FEED button or a paper
jam may result. To remove these forms, tear off the fresh
supply at
printer off line, and press the FORM FEED or LINE FEED
button to eject the remaining forms.
Note: To use the paper memory feature, you need to reset some
DIP switches. See the section on changing
this chapter for instructions on
Saving paper format
The following sections describe how to save paper format and
thickness information for different types of multi-part forms.
Saving information for overlapping multi-part forms
To save paper format and thickness information for multi-part
that overlap
forms
the steps below.
1. Turn off the printer.
2. . Use DIP switch 3-4 to select the memory area
the printer to store the paper format and thickness information.
Memory area
the printer's default setting.) To select memory area 2, turn on
the switch.
Paper memory
Memory 2
When you use multi-part forms that vary in
a
perforation below the front tractor, take the
and thickness information
slightly where they are joined together, follow
1
is selected when DIP switch
OFF
ON
Using the Paper Memory Feature
a
DIP switch setting in
how a
to set DIP switch.
Using the Printer
where you want
3-4
is off. (This is
3-21