Epson ESC/P Commands Arranged by Topic
4
See Chapter
under ESC * for graphics modes.
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Turns on eight-pin single-density graphics mode
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Turns on eight-pin low-speed double-density graphics mode (120 dots
per inch). The total number of columns = ,$1 4 (n2 x
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Turns on eight-pin high-speed double-density graphics mode
per inch). The total number of columns = nl + (n2
9-38 Command Summary
for sample graphics programs. Also see the table
Select High-speed Double-density Graphics Mode
Select Singledensity Graph@ Mode
Select Double-density Graphics Mode
dots per
dots