Epson DFX-8000 User Manual page 246

Paper width
and length:
For multi-part forms joined with spot-
l
gluing, be sure the spots of glue are
spaced the same way on the left and
right edges of the paper.
The binding area should be flat and have
l
no creases.
Overlapping multi-part forms should be
l
joined together at the top of the pages
and not along the sides of the pages.
The sprocket holes of all the form sheets
l
should be aligned properly.
Labels:
Labels should be securely attached to the
l
backing sheet.
with the label material, both in the label
area and in the spaces between labels.
(The backing sheet should not be
exposed.)
The corners of the labels should be
l
rounded.
The label surface should be flat.
l
Continuous paper
forms)
Labels
backing sheet
label
Printer Specifications
Width and length
Width: 101 to 406 mm
(4.0 to 16.0")
Width: 101 to 406 mm
Length: 88.9 mm (3.5")
minimum
Technical Specifications 8-5