Epson DFX-8000 User Manual page 126

3. . Press the TEAR OFF button to enter tear-off mode. The TEAR OFF
light goes on and the printer feeds the paper's perforation to the
printer's tear-off edge.
4. If you need to adjust the position of the perforation so that it
meets the printer's tear-off edge, use the MICRO FEED buttons.
You can press the top or bottom MICRO FEED button once to
feed the paper forward or backward
down the button to feed the paper continuously.
Note: You
can reset the tear-off position only when you are in
tear-off mode (after you have pressed the TEAR OFF button once
and the TEAR OFF light is on).
Using Short Tear-Off
inch, or hold
of an
Using the Printer
3-41