Commands Arranged By Topic - Epson DFX-8000 User Manual

Commands Arranged by Topic

This section lists all the DFX commands. The numbers in the columns on the right are the
page numbers in Chapter 9 where you can find a complete description of the command. If the
Epson ESC/P and IBM emulation mode page numbers are the same, the command is the same
in both and is described only in
modes
included in this quick reference. For those codes that contain variables, such as ESC Q n for
setting the right margin, see Chapter 9.
Printer operation
ASCII
Data control
ASCII
CR
CAN
DEL
Vertical motion
ASCII
the
Hex
Select Printer
Hex
Carriage Return
Cancel Line
Delete Character
Hex
Form Feed
Set Skip Over Perforation
Cancel Skio Over Perforation
Tab
Set Vertical Tabs
Set Vertical Tabs in Channels
Select Vertical Tab Channel
Epson ESC/P mode section. Variables are not
Description
I P-17 I