Table of Contents
Advertisement
Control Without External Triggers
When Controlling the Exposure Time Using Specified Exposure Times
Configure the settings as follows.
Trigger Selector (trigger operation)
Trigger Mode
Exposure Mode
Exposure Time
Exposure Auto
*1 The maximum value for [Exposure Time] varies depending on the value configured for the [Acquisition Frame
Rate Raw] setting.
Max. value for [Exposure Time] = [Acquisition Frame Rate Raw] value - 177 µs
The minimum value will differ depending on the [Pixel Format] setting value.
1
Set [Exposure Mode] to [Timed].
([Timed] is the default setting.)
2
Specify the exposure time in [Exposure Time].
The setting value for the exposure time can only be changed when [Exposure Auto] is set to [Off].
If [Exposure Auto] is set to [Continuous], temporarily set it to [Off] before changing the exposure
time.
3
Set [Trigger Mode] to [On].
4
If necessary, change the [Exposure Auto] setting.
When not Controlling the Exposure Time
Configure the settings as follows.
Exposure Mode
The exposure will be performed with an exposure time equal to 1 / frame rate.
Note
• [Exposure Time] will be disabled.
• [Exposure Auto] cannot be used.
Item
Item
— 20 —
Setting value / selectable range
Frame Start
Off
Timed (control via exposure time)
38 to 7999892 (µs) (1 µs/step)*
Off, Continuous
Setting value / selectable range
Off
GO-2400M-PGE / GO-2400C-PGE
1
Advertisement
Table of Contents
