Supermicro SuperServer E302-9A User Manual page 72

SuperServer E302-9A User's Manual
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial
data communication. Select 2 Stop Bits if slower devices are used. The options are 1 and 2.
ACPI Settings

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power
management settings for your system.
ACPI Settings
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and
provide a common infrastructure for the system to handle hardware errors within the Windows
OS environment to reduce system crashes and to enhance system recovery and health
monitoring. The options are Disabled and Enabled.
Trusted Computing (Available when a TPM device is installed

and detected by the BIOS)
*The features from here to Current Status Information are displayed if a TPM module
is detected:
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Please reboot the system for a change on this setting to take effect. The options
are Disable and Enable.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data
security. Please reboot your system for any change on the TPM state to take effect. The
options are Disable and Enable.
Pending operation
Use this item to schedule a TPM-related operation to be performed by a security device for
system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
72