Table of Contents
Advertisement
SuperServer E302-9A User's Manual
2.3 Mounting on a Wall
The chassis can be mounted on a wall using a bracket (optional, MCP-290-30201-0B).
1. Secure the bracket to the wall where you want the server to be mounted by using four
screws through the holes around the center of the bracket, as shown below.
Bracket Screws
Figure 2-1. Installing the Mounting Bracket
2. Flip the tab of the latch on the top of the chassis bracket to unlock the latch, then slide
the latch upward.
Chassis Bracket Latch
Locking Tab of Chassis Bracket Latch
Figure 2-2. Chassis Bracket Latch
20
Advertisement
Table of Contents
