Table of Contents
Advertisement
3. With the input/output ports facing up, hang the server on the mounting bracket by
hooking the four keyholes on the bottom of the chassis on the four knobs of the bracket.
Figure 2-3. Hanging Server on the Bracket
4. Secure the chassis to the bracket by sliding the latch back down and flipping the tab to
lock it in place.
5. An additional bracket for a power adapter can be attached to the bottom of the chassis
bracket with a screw, as pictured below.
Screw
Figure 2-4. Chassis Bracket with Power Adapter Bracket Attached
Chapter 2: Server Installation
Power Adapter Bracket
21
Advertisement
Table of Contents
