Supermicro SuperServer E302-9A User Manual page 58

SuperServer E302-9A User's Manual
NonVolatile Memory Setup

Method
Use this feature to select how data will be saved after power loss. The options are Dis-
abled and NVDIMM.
*If the feature above is set to NVDIMM, the following items will become available
for configuration:
SoC Pwr Loss Support
Use this feature to enable the internal detection of an Asynchronous DRAM Refresh
(ADR) entry instead of a CPLD. The options are Disabled and Enabled.
Cache Flushing
Use this feature to select the amount of cache that should be flushed. The options are
MemCtrlr only and L1, L2 and MemCtrlr.
ADR State Source
Use this feature to select whether the ADR State source is internal or external. The op-
tions are external and internal.
Internal Pwr Loss Event Setup
SoC Pwr Loss Support
The feature is always Disabled.
PMC Reset
Enable this feature to receive a notification when there is a global reset because of an
SMBus slave power down. The options are Disabled and Enabled.
Power Button Override
When this feature is set to Enabled, it sends a notification when there is a power but-
ton override. The options are Disabled and Enabled.
ME Pwr Button Override
When this feature is set to Enabled, it sends a notification when ME initiates the Power
Button Override. The options are Disabled and Enabled.
ME WDT
When this feature is Enabled, it sends a notification when the ME watchdog timer
expires. The options are Disabled and Enabled.
58